truck - radiator tanks and parts - Solder on Tank Sets - freightliner

This tank has a 2.00" diameter hose connection
A 3/8" diameter expansion tube coming out of the top of the hose connection
Two pin mounts for attaching side frames
Four mounting nuts on the grill side of the tank

This tank has a 2.00" diameter hose connection
A 1/8" NPT fitting for a drain cock
Holes @ 18.00" centers for and oil cooler
Two pin mounts for attaching side frames
Four mounting nuts on the grill side of the tank
Comes with four 5/16" NPT x 4" bolts with nuts, and a 1/8" NPT plug
Note: this tank set fits with Mercedes engine.

This tank has a 2.00" diameter hose connection
A 3/8" diameter expansion tube coming out of the top of the hose connection
Two pin mounts for attaching side frames
Four mounting nuts on the grill side of the tank

This tank has a 2.00" diameter hose connection
Six 1/4" NC threaded nuts (two on the fan side and four on the grill side)
Two mounting brackets on each end to attach side frames
A 1/4" NPT flange for a drain cock
Holes @ 18.00" centers for an oil cooler
Comes with eight 5/16" x 5" NC bolts with nuts and washers.

This tank has a 2.00" diameter hose connection, six 1/4" NC threaded nuts (two on the fan side four on the grill side)
Two mounting bracket on each end to attach side frames and an expansion fitting

These tanks have a 3.00" diameter hose connection 5.75" from the edge of the tank to the center of the hose connection (opposite ends for top or bottom tanks), and a 1/4" NPT flange for either a drain cock or an expansion fitting.
Note: this kit comes supplied with a 1/4" NPT x 3/8" hose barb
1/4" NPT drain cock
Eight 5/16" NC x 4 1/2" bolts with nuts.

Top Tank :
This tank has a 2.00" diameter hose connection
A 3/8" diameter expansion tube coming out of the top of the hose connection
Two pin mounts for attaching side frames
Four mounting nuts on the grill side of the tank
Bottom Tank :
This tank has a 2.00" diameter hose connection
A 1/8" NPT fitting for a drain cock
Holes @ 18.00" centers for and oil cooler
Two pin mounts for attaching side frames
Four mounting nuts on the grill side of the tank
Comes with four 5/16" NPT x 4" bolts with nuts, and a 1/8" NPT plug
Note: this tank set fits with Mercedes engine.

Top Tank :
This Freightliner/Sterling tank has a 2.37" diameter hose connection 4.00" from the edge of the tank to the center of the hose connection
A sleeve for a mounting bolt on each end of the tank
Four 1/4" NC threaded blocks on each side
A 1/4" NPT flange for a 90 degree hose barb
A pair of 5/16" nuts on the top of the tank
Bottom Tank :
This tank is similar to the top tank, except the hose connection is 7.50" from the edge of the tank to the center of the hose connection
Holes @ 12.00" centers to accommodate an oil cooler
Note: this tank set is used with a Detroit Diesel engine.

Top Tank :
This tank has a 2.37" diameter hose connection
Two sleeves for mounting bolts
A 1/4" NPT flange on the top of the tank (for a 90 degrees hose barb)
Eight 1/4" NPT threaded blocks
Two 5/16" NC nuts in the top of the tank
Bottom Tank :
This tank has a 2.50" diameter hose connection
Two sleeves for mounting bolts
A 1/2" NPT flange (for a drain cock)
Eight 1/4" NPT threaded blocks
Two holes @ 12.00" centers to accommodate an oil cooler (to be supplied by the customer)
Hose conn. 7.50" from end to center
Note: this tank set is used with a Mercedes engine.

Top Tank :
This tank has a 2.00" diameter hose connection
Six 5/16" NC threaded blocks (two on the fan side and four on the grill side)
Four mounting bosses to attach the side frames
A 1/4" NPT coupling for an expansion fitting
Bottom Tank :
This tank has a 2.00" diameter hose connection
Six 5/16" NC threaded blocks (two on the fan side and four on the grill side)
Four mounting bosses to attach the side frames
A 1/4" NPT coupling for a drain cock
Oil cooler holes
Note: this tank kit comes supplied with all necessary bolts, nuts, washers, and fittings.

Top Tank

This tank has a 2" diameter hose connection, a pair of pin mounts, a 1/4" NPT flange for an expansion tube, and four 1/4" NC threaded blocks on the grill side of the tank.

Bottom Tank

This tank as oil cooler holes @ 18" centers, a 2" diameter hose connection, a 1/4" NPT flange for a drain, a pair of pin mounts, and four 1/4" NC threaded nuts along the grill side of the tank.

Inlet Tank :
This tank has a 2.00" diameter hose connection 6.25" from the edge of the tank to the center of the hose connection
A 1/4" NPT flange at each end of the tank for drainage
Outlet Tank :
This tank has a 2.00" hose connection 7.75" from the edge of the tank to the center of the hose connection
A hole on one end for the fill neck
Holes @ 18.00" centers to accommodate an oil cooler

Top & bottom hose connections 2.50"
6.00" from end of tank to center of connection
Bottom tank has double pins and holes for oil cooler

Both of these tanks are identical Each has a 2.00" diameter hose connection 6.25" from the edge of the tank to the center of the hose connection
A 1/4" NPT flange on either end of the tank for a drain cock or an expansion fitting.

2.00" top & btm hose connection top connection 6.00" from end of tank to center of connection bottom connection 7.50" from end of tank to center of connection, 18.00" between oil cooler holes

2.50" hose conn., 5.75 from end of tank to center of conn., available in brass and steel (solder dipped)

2.00" hose connection, 2.00" from end of tank to center of connection

hose connection 2.50"; 5.75" from end of tank to center of connection

both hose conn. 2.50" available in brass or steel(solder dipped)

2.00" hose connection, 6.00" from end of tank to center of connection

hose conn. 5.75" from end of tank to center of connection. Conn. 2.50" diameter, 1 - 1/4" NPT fitting on end of tank for drain valve or barb fitting